Code
|
Description |
SG EP 401
|
SCHOUTEN GELCOAT SG EP 401 is a two component, iron filled, brushable, room temperature curing surface coat. GELCOAT SG EP 401 is designed for use in polyurethane foam moulds, resin injection moulds, foundry patterns and vacuum forming tools. |
SG EP 402
|
SCHOUTEN GELCOAT SG EP 402 is a two component, mineral filled, brushable, room temperature curing surface coat. Also available in blue. |
SG EP 402B
|
SCHOUTEN GELCOAT EP 402B is a two component, mineral filled, brushable, room temperature curing surface coat. Also available in White. |
SG EP 404
|
SCHOUTEN GELCOAT EP 404 is a two component, silicon carbide filled, brushable, room temperature curing surface coat. The product has a high abrasion resistance and cannot be machined. |
SG EP 4060
|
SCHOUTEN GELCOAT EP 4060 is a two component, aluminium filled, brushable, room temperature curing surface coat. GELCOAT EP 4060 is designed for applications requiring high heat and chemical resistance and negatives where very fine surface finishes are required. |
SG EP 4060C
|
SCHOUTEN EP 4060C is a two component, unfilled, thixotropic epoxy resin system for use with GELCOAT EP 4060 and SCHOUTEN EP 4350 laminating paste. SCHOUTEN EP 4060C is specifically formulated for high temperature applications. |
SG EP 407
|
SCHOUTEN GELCOAT EP 407 is a two component, dolomite filled, brushable, room temperature curing surface coat. The gelcoat EP407 has high heat resistance, good edge stability, it can be repaired and polished to a smooth finish. |
SG EP 4093
|
SCHOUTEN GELCOAT EP 4093 is a colourless, two component, brushable, room temperature curing surface coat. GELCOAT EP 4093 is designed for use in vacuum forming moulds, applications requiring high heat resistance and negatives where very fine surface finishes are required. |
SG EP 420
|
SCHOUTEN EP 420 is a two component, metal filled, room temperature curing epoxy resin for production of prefabricated support frames, vacuum forming tools and as a back-filling compound for high temperature applications. |
SG EP 421
|
SCHOUTEN EP 421 is an extremely high performance castable, two-component, aluminium filled epoxy resin system. The cured system is formulated for the combination of high strength, high glass transition temperature, and thermal properties needed for injection moulding applications. SCHOUTEN EP 421 can produce injection moulds capable of moulding high quality prototype and short-run production parts. The moulds can be built from existing parts and models such as SLA, machined modelboard or other patterns. |
SG EP 424
|
SCHOUTEN EP 424 is an aluminium filled, two part epoxy casting system formulated for the construction of tools used in vacuum forming machines and the production of prototypes requiring detail and strength. SCHOUTEN EP 424 can also be used as a general purpose casting resin for situations where a high operating temperature is required. SCHOUTEN EP 424 is formulated to have fast cure with minimal shrinkage, and is highly polishable. The low mixed viscosity ensures excellent detail reproduction. A slow hardener is available for very large or deep castings |
SG EP 425
|
SCHOUTEN EP 425 is an aluminium filled, two part epoxy casting system formulated for high temperature applications, such as vacuum forming tools. SCHOUTEN EP 425 is formulated to have fast cure with minimal shrinkage, and is highly polishable. Heat stability up to of 160°C can be achieved with post curing. |
SG EP 426
|
SCHOUTEN EP 426 is an aluminium filled, two part epoxy casting system formulated for high temperature applications, such as vacuum forming tools. SCHOUTEN EP 426 is formulated to have fast cure with minimal shrinkage, and is highly polishable. The low mixed viscosity ensures excellent detail reproduction. A slow hardener is available for very large or deep castings. |
SG EP 4301
|
SCHOUTEN EP4301 is a pasteproduct that can be processed by hand and applied in layers up to 80mm thick. The cured product can be worked with standard tools eg palate knife /scraper.
|
SG EP 4302
|
SCHOUTEN EP4302 is a light brown thixotropic paste. The paste can be processed by hand or with a machine dispenser. The cured product can be worked with standard tools eg palate knife /scraper. It can also be used as an adhesive to adhere modelboards together. |
SG EP 4303
|
SCHOUTEN EP4303 is a fast curing epoxy paste that can be processed by hand and applied in layers up to 40mm thick. The cured product can be worked with standard tools eg palate knife /scraper. |
SG EP 4306
|
SCHOUTEN EP 4306 is a two component, machine-mixed epoxy paste system that is particularly suitable for the manufacture of Design/Styling models or Master models. Once cured the material can be easily machined or worked with hand tools to give a very smooth surface finish. |
SG EP 4307
|
SCHOUTEN EP 4307 is a two component, hand-mixed epoxy paste system that is particularly suitable for the manufacture of Design/Styling models or Master models. Once cured the material can be easily machined or worked with hand tools to give a very smooth surface finish. |
SG EP 435
|
SCHOUTEN EP435 is enriched with long glass fibre strands, and special fillers in a low-density epoxy resin specially formulated. After mixing both components a very smooth consistency is achieved with good and easy to spread characteristics. Used as a back filling compound to support rigid Gelcoats and flexible casting compounds. |
SG EP 4350
|
SCHOUTEN EP 4350 is a glass fibre reinforced epoxy laminating paste for use as a back filling compound in combination with GELCOAT EP 4060 and SCHOUTEN EP 4060C coupling coat. After mixing both components a very smooth consistency is achieved with good and easy to spread characteristics. SCHOUTEN EP 4350 is formulated for use in RIM tools, moulds for pre-pregs and applications requiring high heat resistance. |
SG EP 4351
|
SCHOUTEN EP4351 is enriched with long glass fibre strands, and special fillers in a low-density epoxy resin specially formulated. After mixing both components a very smooth consistency is achieved with good and easy to spread characteristics. Used as a back filling compound to support Rigid Gelcoats and flexible casting compounds. |
SG EP 4352
|
SCHOUTEN EP4352 is enriched with long glass fibre strands, and special fillers in a low-density epoxy resin specially formulated. After mixing both components a very smooth consistency is achieved with good and easy to spread characteristics. Used as a back filling compound to support Rigid Gelcoats and flexible casting compounds. |
SG EP 4384
|
SCHOUTEN EP 4384 is a two component epoxy putty formulated for applications such as: repair, maintenance, construction, model making and pattern making. SCHOUTEN EP 4384 is easily mixed and applied by hand and SCHOUTEN EP 4384 will bond to most substrates (metals, most plastics, rubber, ceramics, concrete, brick, wood etc) and cures at room temperature to give a tough and durable material. Once cured, the material can be machined, drilled, tapped, turned, filed, sawn, sandpapered or painted. Two hardeners are available, |
SG EP 490
|
SCHOUTEN EP 490 is a room temperature curing, two component mineral filled epoxy resin system. SCHOUTEN EP 490 is formulated for production of master moulds, models and prototypes, and for use as a back filling compound. The system has a choice of hardeners. |
SG EP 4905
|
SCHOUTEN EP4905 is a two part system formulated for casting applications. The mix has a low exotherm and shrinkage. The low mixed viscosity ensures excellent detail reproduction. The cured resin is easily polished and machined. |
SG EP 502
|
SCHOUTEN EP 502 is a very low viscosity, laminating and casting resin, with a choice of hardeners. When used for laminating, the low viscosity of SCHOUTEN EP 502 allows excellent wetting of fibres and fillers. SCHOUTEN EP 502 is formulated for use in backfilling compositions using mineral or metallic fillers and for laminates requiring good flexural strength. |
SG EP 504
|
SCHOUTEN EP 504 is a very low viscosity, cold-curing, unfilled epoxy resin system. The low viscosity resin produces excellent wetting of fibres and fillers. The rapid demould time makes this product ideally suited for track side repairs. A choice of three different hardeners is available, allowing fast cure in a variety of conditions. |
SG EP 519
|
SCHOUTEN EP 519 with HARDENER H3, H7 or H8 is a cold-curing, two part, unfilled epoxy resin system. It is formulated for use in backfilling compositions using mineral or metallic fillers and for laminates requiring good flexural strength. It has excellent adhesion to metallic and insulating materials. It can also be used for applications such as coating of insulating tapes and locking of screws etc. |
SG EP 519 /H50
|
SCHOUTEN EP 519 / H50 is a general purpose laminating resin for laminates requiring good flexural strength. The low viscosity of ALCHEMIX EP 519 / H50 allows excellent wetting of fibres, such as carbon fibre. |
SG EP 521 H521 / A521
|
SCHOUTEN EP 521 is a three part epoxy laminating system consisting of Resin, Hardener and Accelerator. The product has very low initial viscosity, low shrinkage and excellent reproduction of detail. Rate of cure may be adjusted by altering the quantity of Accelerator. |
SG EP 522
|
SCHOUTEN EP 522 is a ultra low viscosity epoxy resin system, specifically designed for vacuum bagging and resin infusion applications. The ultra low viscosity produces excellent wetting of fibre reinforcements such as glass, carbon or aramid fibre. |
SG EP 571
H3 (fast)
h8 (slow)
|
SCHOUTEN EP 571 is a high temperature laminating resin system. It has low viscosity, enabling good wetting of fibres and fillers. A superior modified resin system, possessing good heat distortion resistance, used with HARDENER H3 or H8 either singly or blended produces versatility in pot life and cure time. SCHOUTEN EP 571 is formulated for applications such as RIM tooling, marine, aerospace, vacuum forming tooling and other applications requiring high heat dimensional stability. SCHOUTEN EP571 is a two part laminating and casting resin. Low viscosity producing good wetting of fibres and fillers. A superior modified resin system possessing good heat distortion resistance, used with Hardeners H3 or H8 either singly or blended produces versatility in Pot Life and Cure Time. |
SG EP 574
|
SCHOUTEN EP 574 / H574 is a two part, ambient temperature cure, epoxy system; exhibiting outstanding mechanical and thermal properties. This system has low mixed viscosity and when cured shows excellent high temperature and physical properties. This system has excellent wetting properties for various fibre systems including glass fibre, aramid fibre and carbon fibre etc. |
SG EP 575
|
SCHOUTEN EP 575 is a two part, ambient temperature cure, epoxy system; exhibiting outstanding mechanical and thermal properties. This system has low mixed viscosity and when cured shows excellent high temperature and physical properties. This system has excellent wetting properties for various fibre systems including glass fibre, aramid fibre and carbon fibre etc. The system is suitable for a variety of applications including hand lay up and RTM. |
SG EP 5751
H15
|
SCHOUTEN EP 5751 / H15 is a two part, ambient temperature cure, epoxy system, exhibiting outstanding mechanical and thermal properties. This system has remarkably low mixed viscosity and when cured shows good material properties. This system has excellent wetting properties for various fibre systems including glass fibre, aramid fibre and carbon fibre etc. |
SG EP 5751
H22
|
SCHOUTEN EP 5751 / H22 is a two part, ambient temperature cure, epoxy system; exhibiting outstanding mechanical and thermal properties. This system has remarkably low mixed viscosity and when cured shows good material properties. This system has excellent wetting properties for various fibre systems including glass fibre, aramid fibre and carbon fibre etc. |
SG EP 596
|
SCHOUTEN EP 596 is a low viscosity epoxy resin system specifically formulated for use in demanding industrial applications such as heavy duty corrosion protection, structural adhesives and civil engineering. SCHOUTEN EP 596 has a long working time, but will cure at low temperatures and in damp conditions, enabling it to be used in many different environments. |
MS 651
|
Modelboard Sealer MS 651 is a two component epoxy system designed to coat M651 modelboard and other similar surfaces. The product is easily applied by brush and cures quickly at room to give a high gloss coating. |